This website uses cookies. For further information on how we use cookies you can read our Privacy and Cookie notice
HomeIndustrial & ScientificIndustrial ElectricalControls & IndicatorsControllersStepper Motor Driver Easy Controller Pulse PWM Singal
KSh 1,160
KSh 1,86038%
In stock
+ shipping from KSh 440 to CBD - UON/Globe/Koja/River Road
0 out of 5
(No ratings available)Promotions
Delivery & Returns
Shipped from abroad
Choose your location
Pickup Station
Delivery Fees KSh 440
Ready for pickup between 04 July & 08 July when you order within next 7hrs 29mins
Door Delivery
Delivery Fees KSh 781
Ready for delivery between 04 July & 08 July when you order within next 7hrs 29mins
Return Policy
Easy Return, Quick Refund.Details
Seller Information
CsHome
66%Seller Score
64 Followers
Seller Performance
Order Fulfillment Rate: Average
Quality Score: Average
Customer Rating: Good
Product details
This stepper motor drive controller adds a function that can generates PWM signals, there is a jumper on the board, you can set the working mode, the default set is to generate pulse frequency signal. This controller has three kinds of high, medium and low frequency signals can be selected with a jump pin. 2 groups of input design, but it can be used after connected to one group of supplys. One is 15-160VDC supplys. the other group is 5-12VDC. Motor forward and reverse as well as open and close can be controlled by the button. The speed of the motor can be controlled by adjusting the potentiometer to change the frequency.
Features:
This module is a pulse generating module that supplies the stepper driver as a signal. If you want to control the stepper motor, you also have to matching the driver to do so.
This simple controller + stepper driver + stepper motor + direct current supplys can form a simple set of control platforms.
This controller adds a function that can generates PWM signals, there is a jumper on the board, you can set the working mode, the default set is to generate pulse frequency signal.
This controller has three kinds of high, medium and low frequency signals can be selected with a jump pin, the frequency parameters are about: high of 5.8KHZ-127KHZ; medium of 590HZ-15.8KHZ; low of 82HZ-2.3KHZ.
Frequency measurement: you can measure the PUL and common negative terminal (GND) two ports.
2 groups of input design, but it can be used after connected to one group of supplys. One is 15-160VDC supplys. the other group is 5-12VDC. If powered by 5-12VDC supplys, just positive connect to "5-12Volt input", if the supplys is negative connection, please connect to "common negative end".
Motor forward and reverse as well as open and close can be controlled by the button.
The speed of the motor can be controlled by adjusting the potentiometer to change the frequency.
Specifications:
Name: Motor Drive Controller
Material: printed circuit board
Item size: 73 * 51 * 38mm / 2.87 * 2.01 * 1.50in
Package size: 100 * 80 * 50mm / 3.94 * 3.15 * 1.97in
Package weight: 43g / 1.52ounce
Packing List:
1 * Motor Drive Controller
Features:
This module is a pulse generating module that supplies the stepper driver as a signal. If you want to control the stepper motor, you also have to matching the driver to do so.
This simple controller + stepper driver + stepper motor + direct current supplys can form a simple set of control platforms.
This controller adds a function that can generates PWM signals, there is a jumper on the board, you can set the working mode, the default set is to generate pulse frequency signal.
This controller has three kinds of high, medium and low frequency signals can be selected with a jump pin, the frequency parameters are about: high of 5.8KHZ-127KHZ; medium of 590HZ-15.8KHZ; low of 82HZ-2.3KHZ.
Frequency measurement: you can measure the PUL and common negative terminal (GND) two ports.
2 groups of input design, but it can be used after connected to one group of supplys. One is 15-160VDC supplys. the other group is 5-12VDC. If powered by 5-12VDC supplys, just positive connect to "5-12Volt input", if the supplys is negative connection, please connect to "common negative end".
Motor forward and reverse as well as open and close can be controlled by the button.
The speed of the motor can be controlled by adjusting the potentiometer to change the frequency.
Specifications:
Name: Motor Drive Controller
Material: printed circuit board
Item size: 73 * 51 * 38mm / 2.87 * 2.01 * 1.50in
Package size: 100 * 80 * 50mm / 3.94 * 3.15 * 1.97in
Package weight: 43g / 1.52ounce
Packing List:
1 * Motor Drive Controller
Specifications
Key Features
- This module is a pulse generating module that supplies the stepper driver as a signal. If you want to control the stepper motor, you also have to matching the driver to do so.
- This simple controller + stepper driver + stepper motor + direct current supplys can form a simple set of control platforms.
- This controller adds a function that can generates PWM signals, there is a jumper on the board, you can set the working mode, the default set is to generate pulse frequency signal.
- This controller has three kinds of high, medium and low frequency signals can be selected with a jump pin, the frequency parameters are about: high of 5.8KHZ-127KHZ; medium of 590HZ-15.8KHZ; low of 82HZ-2.3KHZ.
- Frequency measurement: you can measure the PUL and common negative terminal (GND) two ports.
- 2 groups of input design, but it can be used after connected to one group of supplys. One is 15-160VDC supplys. the other group is 5-12VDC. If powered by 5-12VDC supplys, just positive connect to "5-12Volt input", if the supplys is negative connection, please connect to "common negative end".
What’s in the box
1 x Motor Drive Controller
Specifications
- SKU: GE840IP379LN9NAFAMZ
- Size (L x W x H cm): 10.00×8.00×5.00
- Weight (kg): 0.08
Customer Feedback
This product has no ratings yet.
Stepper Motor Driver Easy Controller Pulse PWM Singal
KSh 1,160
KSh 1,86038%
Questions about this product?