T-Camera Plus ESP32 CAM Development Board 8MB

T-Camera Plus Introduction T-Camera Plus is a development board equipped with ESP32 (support WiFi Bluetooth) and camera (optional: Normal Camera ; Fish-eye Lens Camera ; Fish-eye Lens Rear Camera , Normal Rear Camera .) and OLED display. Note The camera can be extended to become a rear camera, the program is set to delay the photo, and then become a camera function.

Camera cable length: 75mm

Hardware Specifications

set

ESPRESSIF-ESP32-DOWDQ6 240MHz Xtensa® single-/dual-core 32-bit LX6 microproceor

FLASH

Qflash/SRAM, up to 4 x 16 MB

SRAM

520 kB SRAM +  8MBytes External SPRAM

KEY

reset

Dispaly

IPS Panel ST7789/1.3 Inch

Power Indicator

lamp red

USB to TTL

CH9102F

Camera

OV2640  2Megapixel

On-Board Clock

40MHz crystal oscillator

Working Voltage

2.3V-3.6V

Working Current

About 160mA

Working Temperature Range

-40℃ ~ +85℃

Size

69.13*28.41*8.45mm

Mic

MSM261S4030H0

SDCard Integrated External

SD card slot

Power Management

IP5306

Power Supply

USB 5V/1A

Charging Current

1A

Battery

3.7V lithium battery

Wi-Fi

Standard

FCC/CE/TELEC/KCC/SRRC/NCC（esp32 ）

Protocol

802.11 b/g/n/e/i (802.11n，speed up to150Mbps)A-MPDU and A-MSDU polymerization，support 0.4μS Protection interval

Frequency Range

2.4GHz~2.5GHz(2400M~2483.5M)

Transmit Power

22dBm

Communication Distance

300m

Bluetooth

Protocol

meet bluetooth v4.2 BR/EDR and BLE standard

Radio Frequency

with-98dBm sensitivity NZIF receiver Cla-1,Cla2 Cla-3 emitter AFH

audio frequency

CVSD&SBC audio frequency

Software Specification

Wi-Fi Mode

Station/SoftAP/SoftAP+Station/P2P

Security Mechanism

WPA/WPA2/WPA2-Enterprise/WPS

Encryption Type

AES/RSA/ECC/SHA

Firmware Upgrade

UART download/OTA（Through network/host to download and write firmware）

Software Development

Support cloud server development /SDK for user firmware development

Networking Protocol

IPv4、IPv6、SSL、TCP/UDP/HTTP/FTP/MQTT

User Configuration

AT + Instruction set, cloud server, android/iOSa

OS

FreeRTOS

Github

https://github.com/Xinyuan-LilyGo/esp32-camera-screen

https://github.com/Xinyuan-LilyGO/esp32-camera-plus-bigiot

Shipped According To The Kind Of Your Choice. (Normal Camera;Fish-eye Lens Camera;Fish-eye Lens Rear Camera,Normal Rear Camera.) Shipping List(Shipped according to the kind of your choice) 1 X T-Camera Plus 1 X Power Cable(JST-PH 2.0mm 2PIN)

Shipped According To The Kind Of Your Choice. (Normal Camera;Fish-eye Lens Camera;Fish-eye Lens Rear Camera,Normal Rear Camera.) Normal Camera / Fish-eye Lens Camera:

Fish-eye Lens Rear Camera:

Normal Rear Camera:

Normal Rear Camera With MPU6050:

Fish-eye LensRear Camera With MPU6050:

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.