Wall-mounted LED pool light 304 stainless steel underwater light AC12V RGB color change for el, fountain, home pool lighting

1. This lamp is combined by light source and frame, which means it can be detachable, and light source is using resin filled technology to e it 100% waterproof, which is much better than other pool lamp series.

2. It is wall mounted installation, mostly is for concrete pool and plastic pool

3. The lamp is using LED as light source, can help you save electricity bill.

4. Our Lamp can work with AC12V and DC12V at the same time.

5. RGB is multicolor, including red, green, blue, cyan, purple, yellow, white/warm white, and some dynamic modes.

Input Voltage: 12V AC/DC

Material: 304 stainle steel

Light Source: SMD 2835 LED

Watt: 18W25W35W45W55W

Frequency of remote: 50Hz

Waterproof Grade: IP68(Can be put into water directly).

Power cable: with 1.5 meter

Life span: 50000 hour

One remote can control 2 pieces or more quantity lamps, but better for you to connect AC12V nsformer if you want them synchronous(showing the same color).

Colour:White

Material:Stainle steel 316/304

Size:220x35mm

Package Contents:

1 x LED Pool Lamp

1 x Remote(battery is not included)

1 x Plastic board and some installation screw

Notes need to be careful.

1. Do not connect AC110V, AC230V, or any voltage more than 12V to our lamp.

2. Do not let the lamp CONTINUOUSLY on more than 30 minutes when the lamp is out of water, if not, it will be easier hot and get ed.

3. You don't need to worry when you see the RGB lamps don't show the same color after connecting power, but just switching main power off/on THREE TIMES, they will show the same color.

Only the above package content, other products are not included.

Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.