Wireless PIR Motion Password Sensor Alarm Security Wireless Home Window Door Burglar For Home Security System Keep Your Family Safety

Features:
-- PIR infrared sensor can detect the infrared light emitted when the human body moves
-- 110° wide angle, and 3-5m distance, never miss anything happened in the area.
-- If incorrect password is received, the alarm will ring clearly and loudly, which will alert the neighbors of the intrusion, and can scare away the burglar.
-- PIR motion sensor has high sensitivity and will activate if any movement is detected.
-- Simple to fit, no wires required, just put the required batteries in, fix to a suitable surface.
-- When the PIR sensor detects human movement, the alarm will sound alerting you to a potential attack on your home or an intruder.
-- Widely used at front door, back door, garage, shed, outbuilding etc.

Specification:
: White
Material: ABSPlastic
By: 3 * AA (NOT included)
Working Voltage: 4.5V
Alarm Sound Level: 105dB
Range: 3-5m, angle of 110°
Working mode: CHIME, INSTANT, DELAY
Product Size: 105*136*27mm/4.1*5.3*1.1 inch

Package Includes
1 x Wireless Motion Sensor Alarm( NOT included)

Use Instructions:
ON / OFF:
After the is installed, when the password is entered and the "#" is pressed, the LED will be lit with a 10-second delay. During this period, the infrared sensor and alarm will not be checked for 10 seconds and then enter the alert state. If we enter the password again and press "#" at the end, the LED will blink for a few seconds and then turn off. At this time, the alert state is cancelled.

Alarm sound:
● CHIME -------- When the switch is in the CHIME state, when the infrared sensor head senses that the infrared light changes due to human body movement, the alarm device will emit 2 sounds of "dingdong, dingdong", when 2 After the sound of "Ding Dong", if the infrared sensor head senses the heating object or human body again, the above steps will be repeated. If the infrared sensor head is not sensed, the whole machine is in the alert state. If you need to cancel the alert status, enter the password + "#" to complete the alert after the 2 beeps and ding dong sounds.
● When the INSTANT ----- switch is in the INSTAN state, when the infrared sensor head senses that the infrared light changes due to the movement of the human body, it immediately alarms for 1 minute. The above steps will be repeated. During the alarm process, you can enter a password to cancel the alarm, but it is not to cancel the alert. If you need to cancel the alert, you need to enter the password + "#" again, or enter the password + "#" after completing the alarm.
● DELAY --------- When the switch is in the DELAY state, when the infrared sensor head senses the change of infrared rays due to human body movement, it enters the warning state and emits a warning sound of "DIDI" for 20 seconds, and then alarms. During this period, you can enter the password to cancel the alarm, but not to cancel the alert. If you need to cancel the alert, you need to enter the password + "#" again, or enter the password + "#" after completing the alarm.

change Password:
After initial -on, the initial password is "0000". Then you enter the old password "0000 *" and you will hear a long beep indicating that you entered a correct old password. Now, you can enter a new password, the length can be 1-12 digits + "*", you will hear a long sound, indicating that you successfully modified a new password.

Emergency alarm:
When in an emergency, we can press the red button "PANIC", it will immediately alarm for 1 minute. We can enter the password + "#" to cancel the alarm, but it is not to cancel the alert. If you need to cancel the alert, you need to enter another password + "#" to complete.

Precautions:
● Installed at a height of 1.5 meters from the ground. When installing, pay attention to install the alarm in a more concealed place and put it in a cool and dry place
● Avoid scratching the lens and speaker
● Cannot be installed in the place where direct sunlight shines
● Cannot be installed in high temperature objects and places where temperature and humidity change drastically
● Avoid falling from high altitude and violent collision with hard objects
● When there is dust on the lens and the case, wipe it gently with a damp cloth. Do not wipe the case with volatile and corrosive solvents such as gasoline.
● The alarm sound of this product is loud. For your safety, please pay attention that the distance between your ear and the machine must be more than 30CM during the .



a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a