X302 30W+30W Bluetooth 5.0 Tube Amplifier Power Amplifier Module 6J1 Tube Front Stage Accurate Pairing Fever Power Supply

Feature:1: 6J1 precise matching 30W+30W2: The tube of this product is repable, and supports 6J1, 6m1, 6J2, 6m2, EF95, 6AK5, GE5725W, GE5654W and many other small 7-pin tubes.3: Complimentary power supply is presented,4: Bluetooth 5.0+ AUX input5: The aembly and construction order is easy to understand, and there are picture hintsReminder: The shell and knob cap need to be aembled by yours, and a screwdriver is provided.Description:Adapter power supply: DC12V; 3AAudio input: AUX+BluetoothInput sensitivity: 800mVAdapted speakers: 4-8Ω; 5-50WPower output: MAX 30W*2 @4ΩFrequency response range: 20Hz-20KHzBare machine size: 107*80*40mm (height does not include tube)Packing size: 240*155*70mmPackage weight: about 463gInstructions:1. Turn the switch/volume knob counterclockwise to ensure that the switch is off.2. Install the randomly worn electron tube into the electron tube holder according to the direction (the electron tube is not divided into left and right, check whether the pin is deformed before installation, if there is any deformation, you can gently correct it with your hands, and slowly insert the electron tube vertically into the electron tube holder during installation. Be careful not to shake as much as poible).3. The power amplifier output interface connects to paive speakers (R connects to the right , L connects to the left ) or the AUX audio output interface connects to active speakers.4. Connect the power adapter (power adapter AC110V and AC220V are common).5. Turn the switch/volume knob to turn on, and the indicator light fes.6. This product has two audio input modes: AUX wired and Bluetooth wirele. AUX wired input is preferred. Choose the audio input method you want.7. Rotate the switch/volume knob to adjust the volume to an appropriate level.8. Enjoy the charm of tube amplifiers quietly.Q & A:Q: The status of the indicator light.A: When the power is off, the indicator light does not light up. The indicator light fes quickly when the power is turned on. The Bluetooth link is succeful and the indicator light is always on. The audio cable is plued in, and the indicator light fes slowly.Q: Why is there a buzzing sound in the speaker when one end of the audio input cable is connected to the product and the other end is not connected to the audio source?A: This is because the unshielded audio cable or the audio cable with poor shielding effect is used, which causes the interference signal to enter the power amplifier to be amplified and output. If you hate this kind of sound, it is recommended that you rep the audio cable with good shielding effect or unplug the audio cable.Q: Can I rep the tube to upgrade?A: Yes. This product supports 6J1, 6m1, 6J2, 6m2, EF95, 6AK5, GE5725W, GE5654W and many other small 7-pin packaged tubes. It can be repd directly. Different tube sounds have their own characteristics.Q: Can I directly rep the tube without powering on?A: No. The electronic tube is a high-voltage device, hot pluing can easily damage the electronic tube and the machine, and there is also the risk of electric shock.Q: Why does the volume of the machine remain the same, but the volume of the sound when connected to different audio sources is different.A: The amplitude of the audio signal output by different playback devices is different, and the natural sound level is different. For example, the maximum output amplitude of a mobile phone is 0.35V, while the output amplitude of a computer can reach more than 1V.Warn:1. Please don't open the shell when the power is on. Improper operation will cause the risk of electric shock.2. Do not p the machine in a high temperature and high humidity environment.3. Do not plug in or rep the tube when the power is on, otherwise your tube and machine will be ed out.4. Do not rep the unmatched tube model, otherwise your tube and machine may be ed out.5. When pluing and unpluing the tube, insert it vertically and don't shake it.The package includes:1*Power amplifier module