X79 H61 BTC Mining main board 5X PCI-E 8X Support 3060 3080 Graphics Card with RECC 4G DDR3 RAM and 120G SSD

Brand new X79 BTC 5 card slot mining board +RECC 4G DDR3 RAM and 120G SSD
If you want to use CPUs (not included), please use CPUs below 2630, such as 26 series such as 2603 2609 2620 2603 V2 2609 V2 2620 V2
The BTC X79 motherboard uses the H61 chip and a single-channel 2011 socket CPU;
Design 5 Pcie3.0X8 graphics interface
The computing power of a single card is up to 48MH/s or more, and it perfectly supports 4G video memory graphics cards, which greatly improves the mining function of computing power.

In-line 5 card X79 (H61 chip) motherboard, support 3060 3080 graphics card!
60mm large-spacing graphics slot.
Specification:
Supported CPU platform: for Intel XEON
Chipset: for Intel H61
Supported CPU type: E5-26XX (supports 26 series CPUs below 2630)
Audio chip: N/A
Supported CPU socket: 2011
Network card chip: 1*REALIEK 8105E 100M network card
Memory type: DDR3 supports desktop and server memory
Support Maximum memory capacity: 32G
Working environment: 0-95% relative humidity, non-condensing, -20 Celsius-60 Celsius
Memory description: Support 1066/1333/1600/1866MHz frequency
Detailed interface:
CPU socket: 1*LGA(2011)
USB port: 4*USB 2.0
USB pin: 1*USB 2.0
Hard disk interface: 1*SATA 3.0
Hard disk interface: 1*MSATA
Network card interface: 1*LAN
Memory slot: 1*DDR3
Chipset: BGA (H61)
BIOS initial restore: JCMOS
Graphics interface: 5*PCI Express 3.0 8X, pitch 60mm
Motherboard/graphics card power supply: 6*POWER_PE
Self-initiated call: AUTO_ON
Colour:black
Material:PCB

Package Contents:
1 * Motherboard
1 * Memory
1 * hard disk
Notice: Different batches of products are slightly different, and the colors of the slots and the bottom plate are random, the specified color is not accepted. Please understand it!

Only the above package content, other products are not included.
Note: Light shooting and different displays may cause the color of the item in the picture a little different from the real thing. The measurement allowed error is +/- 1-3cm.