XH-W1411 Thermostat LED Digital Temperature Controller AC 110V 220V 10A DC 12V Switch Thermometer Smart Temperature Regulator

Description:

This product USES the single microcomputer control system + high precision temperature measuring probe, on temperature control performance and precision of temperature control is superior to similar products. This product three window design, start and stop values real-time display, and have intermittent work, time switchhine, and other functions, grown in the greenhouse, aquatic animal husbandry and aquaculture, room temperature control, etc. Can be widely used, is the good aistant of the life that occupy the home!

Parameters:

Product name: high precision digital temperature controller

Specifications: XH - W1411

Temperature measurement range: -55 to + 120 Celsius degrees

Temperature measuring accuracy: plus or minus 0.3 degrees

Resolution: 0.1 degrees

Temperature control range: - 19 to 99 degrees

Accuracy: 1 degrees

Temperature measuring probe: NTC10K/B3950 standard 1 meters waterproof probe

Power supply voltage: AC 220V

Display colors: red, green, blue and yellow (optional)

Applicable envment: - 25 to 55 degrees moisture 20% - 20% (gel)

The output type: 10. A relay output

Appearance size: 90 * 60 mm

Hole size: 70 * 50 mm

How to Use:

1. authors product plug screen display temperature on household socket, illustrate the power supply is connected correctly

2. put the temperature probe need to temperature control, according to the need to set the start and stop the temperature

3. the heating or cooling equipment power supply plug on the thermostat outlet temperature control can be realized

Instructions:

After power-on, if the temperature is within the range, you should immediately start the output and make it stop when it reaches the set value.

Start temperature For example, if you want to control water boiling to stop at 60 Celsius degrees and start over at 45 Celsius degrees, then you should set the start value as 45 and stop value as 60.

Start temperature >stop temperature: refrigeration mode

For example, in summer, you want to control the greenhouse to start the scavenger fan when the temperature is higher than 35 Celsius degrees and stop at 32 Celsius degrees, then you should set the start value as 35 and stop value as 32.

SET: function on/power-on & power-off on

In the state of power-on, you can switch off by a long pre for 3 seconds. After switched off, it will still remain power-off if there is no power supply.

In the state of power-off, you can switch on by preing SET once. After switched on, it will still remain power-on if there is no power supply.

In the state of normal temperature control, you can switch between F-1 to F-3 by preing SET once.

F-1 intermittent work mode unit: minute left: start minute right: stop minute

F-2 time switch left: hour right: minute 99h59mins max

F-3 time switch left: hour right: minute 99h59mins max

Temperature correction: Enter the temperature correction function by removing the controller plug and preing SET to supply power. The screen displays –00--. You can increase or decrease temperature on the basis of the original temperature, maximum range -9.9~+99. After correction:

Real-time temperature = the temperature before correction + the corrected value

Pre (start+-) power-on to enter self-check function; Pre (stop+-) power-on to restore factory settings.

Restore the factory:

If there is some setting mistake or setting disorder, you can pre the two stop ons to restore factory settings.

When the screen displays 88-888-88, and the buzz gives out a long sound, it means the restoration has finished.

Default start value is 25, stop 40, F-1 01-10, F2 00-30, F-3 00-30, correction=000

Troubleshooting:

1. no reaction, the screen is not bright

To check whether there is electric socket, can use the same plug of other electric equipment check, if there is a electric check the thermostat, was shut down, according to a SET up

2. the screen can display, but cannot reach the temperature control function

If the temperature is set right, but the start don't start, to stop don't stop it is poible to start and stop the set data error, please to drop down value and stop values

3. the temperature changes control

This controller is a type of control and also start when the red light is bright, the green light to stop time, if the control indicator in the proce of change is right, but temperature had rushed explain the thermostat is good, you can reduce your heating/cooling efficiency can be resolved

4. temperature measurement with actual deviation

Among the thermostat display real-time temperature, if you feel that now temperature thermostat for 30 degrees according to 29.6, you can enter the temperature correction, hold down the school SET up temperature can be SET at 0.4, real-time temperature is 31.2, if you think is 30 May fall correction to 1.2 temperature so that you can get what you want

5. other faults and matters not mentioned herein can be with your company

Attention:

Be sure to carefully read this manual first to use this product

1. this product is a three plugs please socket with ground wire

2. the thermostat host is not waterproof, avoid water, it is forbidden to bring into the bathroom to use or outdoor use

3. the use of power is greater than the product is forbidden nominal power or cause permanent damage and danger

4. the actual temperature control should pay attention to observe whether temperature control is executed correctly before leaving

Package Include:

1PC x XH-W1411 Time Switch AC 220V 10A LED Digital Temperature Controller Thermostat Real Time Thermometer Smart Temperature Regulator

About shipping
Shipping and Packaging All itwill be double checked and well packed before sending.Itwill be dispatched within 2 business days after buyers pay for the order. It usually takes about 14 to 18 working days for delivering the package to the destination(for e areas,it may take a little longer). 

Special Announcement:
Please fill in the correct and detailed consignee, address and phone number in the order. For fast and correct delivery.If you do not receive order within 30 working days,please feel free to contact Customer Service before leaving Negative and Neutral Feedback, we will do our best to help you resolve the problem.TaxNo, you will only pay what is quoted as total cost at checkout, no more. You are not expected to pay any additional duties ores. If you are asked by Customs or our logistic partner to pay duties, please contact our Customer Service .

Your 100% satisfaction is very important to us
If the product is not on good condition, You can return this product within 14 working days, please contact customer service center before returning.FeedbackYour satisfaction is our first priorityIf you receive the order and it is in good condition,we would be grateful if you would leave us 5 star Positive Feedback for the transaction.