XY-E100L 50Wx2+100W Amplifier 2.1 Bluetooth-Compatible 5.1+AUX Board Set

XY-E100L App Control 50Wx2+100W Amplifier Board 2.1 Bluetooth-Compatible 5.1+AUX Subwoofer Module Audio Stereo Wirele ModulatorFeature:1. Adopt domestic Cla-D Power amplifier chip scheme: high efficiency, good distortion and anti squeak; nsparent sound quality and strong driving force2. Bluetooth-compatible 5.1 audio power amplifier module: 2.1 dual stereo output, output power 50W * 2 (left and right s) + 100W (subwoofer), pure sound quality. The is pure and nsparent, the midrange is gentle and delicate, and the ba is surging and shocking.3. Claic appearance multifunctional main knob: the main knob adopts rotary only used in high-end power amplifier to realize 360 degree steple tuning. It feels smooth, one key start and stop, long pre to start and stop, and the operation is simple and convenient.4. Support mobile app control: newly upgrade Sini link app; Support to modify Bluetooth-compatible name; Set Bluetooth-compatible paword; Off / on tone5. Heat diipation mechanism: a large-area heat sink pasted with special heat conducting silica is adopted, and the copper coating close to the shell is used for heat diipation. The heat diipation area is doubled to ensure the full power and high-performance operation of the product.Specification:Model: XY-E100LBluetooth-compatible version: 5.1Audio : 2.1 sPower supply: above DC 9-24v / 3ASound source input: Bluetooth-compatible + auxAudio output: left and right s + subwooferVolume adjustment: high-end knob adjustment, smooth ferequency range: 20Hz -- 30kHzSignal to noise ratio: 92dBOutput power: 50W * 2 (left and right s) + 100W (subwoofer) box (left and right s) adapter Speaker: 10W -- 50W / 4 Ω -- 8 ΩSubwoofer (subwoofer) adapter horn: 20W -- 100W / 4 Ω -- 8 ΩProtection mechanism: electrostatic protection, overcurrent protection, short circuit protection and overheating protectionUnique function: support Sini link app; Modify the Bluetooth-compatible name; Set Bluetooth-compatible paword; Off / on toneSize: 70 * 73 * 20MM/2.8x2.9x0.79inWeight: 95gPrecautions for modifying Bluetooth-compatible name:1. Enter the name to be modified in the Bluetooth-compatible name text box and click settings (limited to 10 characters)2. After setting succefully, go to mobile phone settings - > Bluetooth-compatible and find the Bluetooth-compatible name of the currently available device.3 Then, click the setting icon behind the Bluetooth-compatible name to enter the setting page, and click Cancel pairing4. Finally, power on the Bluetooth-compatible power amplifier board again, search in the mobile phone settings - Bluetooth-compatible, and the modified Bluetooth-compatible device name will appear. Just connect.Bluetooth-compatible paword setting steps:Click the Bluetooth-compatible paword on to open the Bluetooth-compatible paword. After the Bluetooth-compatible paword is turned on, it defaults to 1234. If you want to modify it, enter a new paword in the text box (Note: the paword must be 4 numbers), click Set, and you will be prompted that the setting is succeful, the paword will be set, and the connection paword of power amplifier board will take effect againNote:The impedance of the adaptive horn is 4 s, and the power supply shall not exceed 12V; The impedance of the adaptive horn shall be 8 s, and the power supply shall not exceed 24VThe mobile phone system will remember the paired Bluetooth-compatible device and connect Bluetooth-compatible directly after restarting the power amplifier board; The pairing paword is required only when the pairing is cancelled and the Bluetooth-compatible connection is searched againDue to the different monitor and light effect, the actual color of the item might be slightly different from the color showed on the pictures. Thank you!Please allow 1-2cm measuring deviation due to manual measurement.1 Set xAmplifier Board