iClear Standard RO Water Purifier

STANDARD PURIFIER   iClear standard purifier machine is equipped with the Reverse Osmosis technology that removes bacteria and treats salty and hard water in which the mineral density is too high, making the water healthy and safe for usage.

 

Description

• The Standard Water Purifier is suitable for any household; both large and small.
• It is connected directly from the tap source of water and is installed under the sink.
• It can purify up to 4000 Liters of water per year.
• This model has both leasing and ownership options;

 

Ownership

1. The Full Standard Purifier Package comes with a pressure tank and a tap.
2. The Basic Standard Purifier sells without any pressure tanks or taps.

Leasing 

1. It includes a water purifier, installation, and 1-year free service. Ownership granted in 5 years.
2. After 1 year, if satisfied with the service, you can renew the contract for at least 1 year.

 

 Installation Steps

Below is a general installation procedure of the water purifier.

Notice: In some situations (such as moldy, damp, dirty, messy, etc.), the installation

environment needs to be sorted out, cleaned, and disinfected before unpacking and installation. 

• Cut 3 PE pipes with proper length, insert them into the corresponding inlet and outlet water ports (Inlet, Pure, Waste), and then insert the blue locks back; cut the pipe where connected to the Pure port and connect it to a valve connection location, which no need to remove.
• Put the PE tube inserted in the Inlet into the raw water container, put the PE tube inserted in the Pure into the drinking water container (for drinking), put the PE tube inserted in the Waste into the waste water collection container (for cleaning or watering flower)
• Put the other end of the PE tube connected to the Inlet into the raw water container (make sure the raw water container have sufficient water when the machine is working), turn on the ball valve

 

The first time to use and debug the machine

Switch on the Pure PE tube, connect the power adapter and plug in the power supply, machine runs. Because new machine needs to be filled with water, it will need to take a few minutes for the water to come out from the water outlet (Pure, Waste). Due to the characteristics of the reverse osmosis membrane, the membrane contains moisturizing ingredients (the main ingredient is food-grade glycerin). In order to make the water taste better, use the machine as much as possible in the first day. The filtered water is not recommended for drinking, but can be used for kitchen cleaning. If the above operations cannot be performed, it is recommended to turn on the faucet every 2 hours to produce water for 15 minutes and drain it, circulate it for more than 12 times to fully ensure the taste.

  Cautions

• The first flush is to clean the filter element and piping. The water may be gray or bubble-like,this is normal, please continue to rinse until it is clear.
• Since the gas solubility increases when the raw water passes through the high pressure physical filtration of the water purifier, bubbles (similar to the bubbles of carbonated drinks) will be generated when the pressure overflows when the pure water flows out. Because the pure water has no impurities, the bubbles take a long time to dissipate, which is normal. Physical phenomenon, harmless to human body, please rest assured to drink.
• The pure water can not to drink when the first time use or after replace the RO membrane filter, it need to be drained.
• When the water is not released for a long time, the pure water TDS value will be high, which is a normal phenomenon. At this time, it is necessary to drain the pure water for 30 seconds for washing.
• Cut off water and electricity when going out more than 24 hours.

  After-sales Service  

• Please ask for help by visiting our official website if there is any problem related to the product;
• One -year warranty is provided by iClear with replacement of filters exclusive; and receipt date is taken as the official start of warranty

 

The following situations are not covered by the warranty.

• ©Damage caused by water supply pressure higher than 0.4MPa;
• @Damage caused by improper use, storage and maintenance from consumers;
• @Damage caused by installation, maintenance, etc. operated by non-official after-sales service from iClear;
• @Damage caused by replacing filters or other accessories from other companies; @Damage caused by force majeure;
• ® Damage caused by not following the instructions;
• Cf) No warranty card.