RAF Infrared Single Electric Cooker With Ceramic Panel

The RAF R.8003 single-burner induction cooker is  a great helper for cooking a variety of dishes. It is compact, easy to use, does not take up much space in the kitchen. This multifunctional stove is ideal for small spaces, for the summer or for travel. For cooking and heating food, you can use dishes made of any heat-resistant material : steel, cast iron, aluminum, copper, ceramics, tempered glass, etc. RAFF R.8003 electric stove is very economical and does not require special care. It spends much less energy and time on cooking, and the food that gets on its surface does not burn, the stove can be cleaned right away simply by using a napkin. 

Features of the RAF plate:

• timer;
• touch control with LCD display;
• automatic shutdown function;
• thermostat;
• 3 modes of operation;
• protection against overheating;
• the possibility of manually adjusting the heating power;
• ease and simplicity of use;
• the possibility of using dishes of absolutely any material.

The upper part of the cooking surface is made of glass ceramics , which is quite strong. Using the buttons on the bottom of the case, you can set the cooking time, choose the level of power consumption, adjust the heating temperature from 80 to 500 C. Power regulation occurs in two ways: continuous and pulsed. It looks like this: at maximum power, the stove works at the highest frequency (usually 50-100 kHz), if the power is reduced, the frequency decreases. But below 20 kHz, the frequency is not reduced to avoid the appearance of a sound that is uncomfortable for users (people cannot hear frequencies above 20 kHz). Therefore, if the power is set below the one at which the inverter operates at a frequency of 20 kHz, the burner switches to intermittent heating mode: it turns on and off once every few seconds. The less time it will be on, the less power will be. The device has active cooling with the help of an air fan in the lower part of the case, as well as built-in protection against overheating. The type of control is electronic. RAFF tile  supports several modes of automatic programs for cooking certain types of dishes — cooking soup, stewing meat, deep-fry, porridge, churning milk, boiling water, frying, temperature control, stewing with hot steam, high heat.

Characteristics of the RAF plate:

• type: infrared plate;
• coating of the cooking surface: glass ceramics;
• material: ron lower shell + decoration as crystals plate;
• power cable specification: 1.25 square;
• control type: touch;
• Total number of burners: 1;
• fast heating to temperature: 500 degrees;
• power supply: 220-240 V ~ 50/60 Hz;
• power: 3500 W;
• power supply: network.