4000 MW 802.11b / G / N Wi-Fi Wireless Router Amplificador

This 2.4 GHz WLAN signal b ooster is designed for IEEE 802.11b/g/n wireless LAN applications. It adopts the direct sequence spread spectrum(DSSS) and orthogonal frequency division multiplexing(OFDM) technology of WLAN communication. The product is compatible with time-division duplexing(TDD) method of WLAN and using rapid microwave detection technology to provide high linearity amplification. The signal b ooster can work with most WLAN/WiFi devices, BT, ZigBee and increase the signal strength, therefore a larger WLAN coverage and more stable transmission rate.



Features:

20X the , improving the link quality and coverage of certified WLAN devices.

2.5dB ultra-low noise.

Wide 6-16V operating input range.

Working with certified IEEE 802.11b/g/n wireless LAN devices.

Simply plug and play, no software is required.



Specifications:

Frequency range: 2.4-2.5GHz

Operating voltage: 6-16V

Receiving gain: 10dB±1

Transmission gain: 13dB±1

Input trigger : 3dBm(min), 20dBm(max)

Max output (P1dB): 36dBm(4W)

EVM: 3％@28dBm 802.11g 54Mbps OFDM 64QAM BW 20MHz

supply current: 435mA @ Pout 28dBm 9V

Noise figure: ＜2.5dB

TX/RX switch time delay: ＜1us

LED indicator: Transmitter: green, receiver: red

Operating ambient temperature: -40℃~70℃

Operating humility: Up to 95％ rel. humidity

Item size: 8.2 * 5 * 2.1cm / 3.22 * 1.96 * 0.82in (L * W * H)

Item weight: 181g / 6.39oz

Package size: 21 * 12.5 * 5cm / 8.26 * 4.92 * 1.96in (L * W * H)

Package weight: 381g / 13.43oz



Applications:

Wireless LAN 802.11b/g/n access point clients.

Based on the 2.4GHz WLAN wireless base stations.

Based on the 2.4GHz WLAN wireless bridges.

Indoor distribution systems (multi-play) in the combiner.

Based on ZigBee, BT protocol wireless devices.



Installation Instructions:

Step1: Disconnect the supply to AP/Router.

Step2: Detach the antenna from your certified wireless AP/Router.

Step3: Connect RG316 cable (included) to the booster and AP/Router.

Step4: Connect the antenna to the other end of the booster.

Step5: Connect the supply to the booster first and subsequently the AP/Router.



Package List:

1 * 4W signal b ooster

1 * adapter

1 * 20cm RG316 cable

1 * 5dBi antenna

1 * User manual (English)
a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a a