Buffing kit

Choose the buffing kit by the surfaces you’ll polish and the tool you’ll use. This set is designed for drill-powered finishing on metal, plastic, ceramic, and glass, and includes three sponge cones and nine buffing pads in three hardness levels (orange hard, yellow medium, blue soft). The shank size is 1/4'' and the handle length is 1.1 inches, with pad diameters of 75mm and 25mm. This helps you select the pad hardness and wheel type based on scratch severity and surface sensitivity.

Pad hardness and sponge design are the most complex attributes. The kit offers two sponge styles (flat and waved) and color-coded hardness (orange hard, yellow medium, blue soft). For deeper, rough scratches on metal, start with the orange pads; for delicate surfaces, use the blue pads to minimize heat and abrasion. The included 4.5 inch wool felt wheels provide a different finishing option. Matching pad hardness to surface sensitivity ensures efficient, safe polishing without gouging.

DIY enthusiasts working on cars, wheels, glass, or ceramics will benefit from the full kit, as it covers metal, plastic, and glass surfaces. The set’s versatility—three pad hardness levels, two sponge styles, and multiple finishing tools—lets a hobbyist tackle general polishing and light scratch repair, while a more experienced user can fine-tune the approach based on material and desired gloss.

After use, clean pads with a gentle solvent or soapy water if needed and allow them to air-dry completely before storage. Store in a dry, cool place away from direct sunlight to prevent pad deformation. Inspect sponges and wheelfaces for wear and replace any pad showing significant cracking or loss of shape. Keeping pads clean and dry preserves their performance and prolongs their life for future polishing tasks.

Wear eye protection and keep hands clear of spinning pads. Start with a low speed and gradually increase as needed to avoid splatter or overheating of the workpiece. Secure the item being polished and ensure the shank is properly mounted in the drill chuck. Use the appropriate pad for the material and avoid forcing the tool, which can cause kickback or uneven finishes.

Yes, the kit is designed with a 1/4'' (6mm) shank so it fits most standard drills and cordless drivers. The 28mm handle length and 75mm polishing wheel diameter provide a compact, versatile setup for hand-friendly control. By confirming your drill accepts 1/4'' shanks, you can safely pair it with these pads and wheels to achieve a smooth finish on a variety of surfaces.