Tac2162301 1 6mm

Choose the category by how you buy and use the disc: pick hand-tools for a single abrasive metal cutting disc and power-tools-replacement-parts for bulk packs. tac2162301 1 6mm is a 230 mm diameter metal cutting disc with a 1.6 mm thickness and a 22.2 mm bore, from TOTAL, typically used with angle grinders. Look for the blue TOTAL disc and confirm the bore fits your tool's spindle, and select a single disc or a 25-pack as needed.

The most important detail is the bore size of 22.2 mm. This determines whether the disc will mount correctly on your grinder’s spindle and flange. Ensure your tool supports a 22.2 mm bore, and consider the 1.6 mm thickness for rigidity and cut depth. Also verify compatibility with TOTAL blue discs and the packaging option you need.

A DIYer typically uses tac2162301 1 6mm for occasional metal cutting on small projects, focusing on control and precision. A professional expects high-volume, fast cutting with consistent results, often choosing the bulk 25-pack option for supply continuity. Both should match the 230 mm diameter, 1.6 mm thickness, and 22.2 mm bore to the tool, and follow the tool’s RPM and safety guidelines from the TOTAL brand.

Start by mounting the disc correctly: ensure your grinder supports 230 mm discs and a 22.2 mm bore, and use the appropriate flange and guard. Check the tool’s RPM rating and never exceed it with this disc. After use, inspect for cracks or heat warping and store in a dry place to prevent corrosion. Replace the disc if any damage is found.

Pair tac2162301 1 6mm with TOTAL metal-cutting discs in bulk packs to fit your usage, such as the 25-pack option for ongoing projects. For prep work, use compatible drill bits and hammer drill bits from TOTAL to handle holes or preparation tasks before cutting. Look for a blue TOTAL disc to ensure branding and compatibility, and consider keeping a spare disc on hand for convenience.