UNIVERSAL V 3.0 Engraver CNC Shield+Board+A4988 Stepper Motor Drivers For UNO R3 Arduino

Have one to sell?
Sell yours Here >
  • Sold by Meet New
    Seller Score:
    3.8 / 5
    Selling on Jumia: 7 months
    Detailed Seller Ratings(Out of 5)
    • Fulfillment rate 2.0 (Below Average)
    • Product Quality 5.0 (Above Average)
    • Shipping Speed 3.0 (Below Average)
    1,000+Successful Sales
  • Delivery

    Delivery Timelines and Cities

    City

    Standard Shipping

    Zone 1 & 2 (e.g. Nairobi)

    1*

    2-3

    18-23

    Zone 3 (e.g. Mombasa)

    2-3*

    3-5

    18-23

    Zone 5,6 & 7 (e.g. Machakos)

    3-6*

    4-8

    18-23

    Pick Up Stations

    1 - 3

    1 - 3

    18-23

    Jumia Express is available only for items with the logo. Click here for more information

    Delivery times are business days only, and do not include Sunday.

    Click here for more info.

    Click here for our full Delivery Timelines

    & Click here for our Shipping fees details

    Shipped from overseas. Delivered by Wednesday 31 Oct
Shipped from abroad
Customs and International Shipping fees included.
International Admin Fee : KSh 100
No cancellation after ordering - Return allowed only for defective and wrong items - No warranty
Engraver CNC Shield Board +Arduino R3 Board + 4 x A4988 Stepper Motor Driver



(1)Engraver CNC Shield Board

Version:3.0

Color:Red

Size(L*W*H):68 x 53 x 18 mm

Voltage:DC 12~36 V (At the moment only the DRV8825 drivers can handle up to 36V so please consider the operation voltage when powering the board.)



Features:

1.Uses removable A4988 or DRV8825 compatible stepper drivers.

2.The extension board can be used for carving machine, 3 d printer driver expansion board

3.GRBL 0.8 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)

4.PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)

5.Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.

6.Please note that this is an unassembled kit and Basic soldering skills are needed.

image

image

image

image

image

image

image

image



(2)A4988 Stepper Motor Driver

Color:Red

Size(L*W*H):20 x 15 x 10 mm

Thermal shutdown circuitry:Yes

Crossover-current protection:Yes

Ground fault protection:Yes

Load short-circuit protection:Yes

Compatible logic supply: 3.3V and 5 V

Five selectable step modes: full, 1/2, 1/4, 1/8 and 1/16



Features:

1.Mix with slow current decay modes.

2.Internal UVLO and Low RDS (On) Output.

3.Automatic current decay mode detection/selection.

4.Synchronous rectification for low power dissipation.

5.Warning: Connecting or disconnecting a stepper motor while the driver is powered can destroy the driver.



(3)Arduino R3 Board

MCU: ATmega328

Clock speed: 16 MHz

USB interface: ATmega16U2

Operating voltage: 5 V

I-I/O pin output current: 40 mA max

3.3 V output current: 150 mA max

Digital I/O pins: 14 (including 6 with PWM capability)

Analog input pins: 6

EEPROM: 1 kB

Static RAM (SRAM): 2 kB

Flash memory: 32 kB

Size(L*W*H):68 x 53 x 10 mm



Package Included:

1 x Arduino R3 Board

1 x Engraver CNC Shield Board

4 x A4988 Stepper Motor Driver

1 x 40-Pin Row Needles

1 x Cable



Note:

Manual measuring, please allow 1 ~ 3 cm error,thank you.
Key Features
1.Uses removable A4988 or DRV8825 compatible stepper drivers.
2.The extension board can be used for carving machine, 3 d printer driver expansion board
3.GRBL 0.8 compatible. (Open source firmware that runs on an Arduino UNO that turns G-code commands into stepper signals)
4.PWM Spindle and direction pins,4-Axis support (X, Y, Z , A-Can duplicate X,Y,Z or do a full 4th axis with custom firmware using pins D12 and D13)
5.Compact design. Stepper Motors can be connected with 4 pin molex connectors or soldered in place.
6.Please note that this is an unassembled kit and Basic soldering skills are needed.
Specifications of V 3.0 Engraver CNC Shield+Board+A4988 Stepper Motor Drivers For UNO R3 Arduino
SKU
UN811EL0ML8SQNAFAMZ
Size (L x W x H cm)
16 x 10 x 4
Weight (kg)
0.1
Main material
N/A
  • 5 stars
    (0)
  • 4 stars
    (0)
  • 3 stars
    (0)
  • 2 stars
    (0)
  • 1 star
    (0)
Average Rating
0
No rating yet.
Have you used this product before?
Write a Review